Sunday, June 16, 2013

Concepts of Programming Languages – Chapter 12


Review Question

2. What are the problems associated with programming using abstract data types?
-In nearly all cases, the features and capabilities of the existing type are not quite right for the new use.
-The type definitions are all independent and are at the same level.

4. What is message protocol?
Message protocol is the entire collection of methods of an object.

5. What is an overriding method?
Overriding method is method that overrides the inherited method.

7. What is dynamic dispatch?
Dynamic dispatch is the third characteristic (after abstract data types and inheritance) of object-oriented programming language which is a kind of polymorhphism provided by the dynamic binding of messages to method definitions.

12. From where are Smalltalk objects allocated?
Smalltalk objects are allocated from the heap and are referenced through reference variables, which are implicitly dereferenced.

15. What kind of inheritance, single or multiple, does Smalltalk support?
Smalltalk supports single inheritance; it does not allow multiple inheritance.

19. How are C++ heap-allocated objects deallocated?
C++ heap-allocated objects are deallocated using destructor.

29. Does Objective-C support multiple inheritance?
No Objective-C doesn’t support it. (It supports only single inheritance).

33. What is the purpose of an Objective-C category?
The purpose of an Objective-C category is to add certain functionalities to different classes and also to provide some of the benefits of multiple inheritance, without the naming collisions that could occur if modules did not require module names on their functions.

38. What is boxing?
Boxing is primitive values in Java 5.0+ which is implicitly coerced when they are put in object context. This coercion converts the primitive value to an object of the wrapper class of the primitive value’s type.

39. How are Java objects deallocated?
By implicitly calling a finalizemethod when the garbage collector is about to reclaim the storage occupied by the object.


Problem Set

3. Compare the inheritance of C++ and Java.
- In Java, all classes inherit from the Object class directly or indirectly. Therefore, there is always a single inheritance tree of classes in Java, and Object class is root if the tree. In Java, if we create a class that doesn’t inherit from any class then it automatically inherits from Object Class. In C++, there is forest of classes; when we create a class that doesn’t inherit from anything, we create a new tree in forest.
- In Java, members of the grandparent class are not directly accessible.
- The meaning of protected member access specifier is somewhat different in Java. In Java, protected members of a class “A” are accessible in other class “B” of same package, even if B doesn’t inherit from A (they both have to be in the same package)
- Java uses extends keyword for inheritence. Unlike C++, Java doesn’t provide an inheritance specifier like public, protected or private. Therefore, we cannot change the protection level of members of base class in Java, if some data member is public or protected in base class then it remains public or protected in derived class. Like C++, private members of base class are not accessible in derived class.
Unlike C++, in Java, we don’t have to remember those rules of inheritance which are combination of base class access specifier and inheritance specifier.
- In Java, methods are virtual by default. In C++, we explicitly use virtual keyword.
- Java uses a separate keyword interface for interfaces, and abstract keyword for abstract classes and abstract functions.
- Unlike C++, Java doesn’t support multiple inheritance. A class cannot inherit from more than one class. A class can implement multiple interfaces though.
– In C++, default constructor of parent class is automatically called, but if we want to call parametrized constructor of a parent class, we must use Initalizer list. Like C++, default constructor of the parent class is automatically called in Java, but if we want to call parametrized constructor then we must use super to call the parent constructor

5. Compare abstract class and interface in Java.
- First and major difference between abstract class and interface is that, abstract class is a class while interface is a interface, means by extending abstract class you can not extend another class because Java does not support multiple inheritance but you can implement multiple inheritance in Java.
- Second difference between interface and abstract class in Java is that you can not create non abstract method in interface, every method in interface is by default abstract, but you can create non abstract method in abstract class. Even a class which don’t contain any abstract method can be abstract by using abstract keyword.
- Third difference between abstract class and interface in Java is that abstract class are slightly faster than interface because interface involves a search before calling any overridden method in Java. This is not a significant difference in most of cases but if you are writing a time critical application than you may not want to leave any stone unturned.
- Fourth difference between abstract class vs interface in Java is that, interface are better suited for Type declaration and abstract class is more suited for code reuse and evolution perspective.
- Another notable difference between interface and abstract class is that when you add a new method in existing interface it breaks all its implementation and you need to provide an implementation in all clients which is not good. By using abstract class you can provide default implementation in super class.

7. What is one programming situation where multiple inheritance has a significant disadvantage over interfaces?
A situation when there are two classes derived from a common parent and those two derived class has one child.

9. Give an example of inheritance in C++, where a subclass overrides the superclass methods.
class plane{
public:
 void fly(){
  cout << “fly” << endl;
 }
};
class jet: public class plane{
public:
 void fly()
  {
   cout << “Fly! Rocket jet activated!” << endl;
  }
};

10. Explain one advantage of inheritance.
Inheritance offers a solution to both the modification problem posed by abstract data type reuse and the program organization problem. If a new abstract data type can inherit the data and functionality of some existing type, and is also allowed to modify some of those entities and add new entities, reuse and is also allowed to modify some of those entities and add new entities, reuse is greatly facilitated without requiring change to the reused abstract data type. Programmers can begin with an existing abstract data type and design a modified descendant of it to fit a new problem requirement.
Furthermore, inheritance provides a framework for the definition of hierarchies of related classes that can reflect the descendant relationship in the problem space.

12. Compare inheritance and nested classes in C++. Which of these supports an is-a relationship?
Inheritance is where one class (child class) inherits the members of another class (parent class). Nested class is a class declared entirely within the body of another class or interface.
Inheritance does.

17. What are the different options for object destruction in Java?
There is no explicit deallocation operator. A finalize method is implicitly called when the garbage collector is about to reclaim the storage occupied by the object.

Saturday, June 15, 2013

Concepts of Programming Languages – Chapter 11


Review Question

2. Define abstract data type.
Data type that satisfies the following conditions:
-The representation of objects of the type is hidden from the program units that use the type, so the only direct operations possible on those objects are those provided in the type’s definition.
-The declarations of the type and the protocols of the operations on objects of the type, which provide the type’s interface, are contained in a single syntactic unit. The type’s interface does not depend on the representation of the objects or the implementation of the operations. Also, other program units are allowed to create variables of the defined type.

8. What is the difference between private and limited private types in Ada?
Limited private is more restricted form and objects of a type that is declared limited private have no built-in operations.

10. What is the use of the Ada with clause?
With clause makes the names defined in external packages visible; in this case Ada. Text_IO, which provides functions for input of text.

11. What is the use of the Ada use clause?
Use clause eliminates the need for explicit qualification of the references to entities from the named package.

12. What is the fundamental difference between a C++ class and an Ada package?
Ada packages are more generalize encapsulations that can define any number of types.

15. What is the purpose of a C++ destructor?
The purpose of a C++ desctructor is as a debugging aid, in which case they simply display or print the values of some or all of the object’s data members before those members are deallocated.

16. What are the legal return types of a desctructor?
Destructor has no return types and doesn’t use return statements.

21. What are initializers in Objective-C?
The initializers in Objective-C are constructors.

22. What is the use of @private and @public directives?
The use is to specify the access levels of the instance variables in a class definition.

27. Where are all Java methods defined?
All Java methods are defined in a class.

30. What is a friend function? What is a friend class?
a “friend” of a given class is allowed access to public, private, or protected data in that class. Normally, function that is defined outside of a class cannot access such information.

Class that can access the private and protected members of the class in which it is declared as a friend. On declaration of friend class all member function of the friend class become friends of the class in which the friend class was declared.

43. What is a C++ namespace, what is its purpose?
In general, a namespace is a container for a set of identifiers and allows the disambiguation of homonym identifiers residing in different namespaces. The purpose is to help programs manage the problem of global namespace.


Problem Set

4. What are the advantages of the nonpointer concept in Java?
Any task that would require arrays, structures, and pointers in C can be more easily and reliably performed by declaring objects and arrays of objects. Instead of complex pointer manipulation on array pointers, you access arrays by their arithmetic indices. The Java run-time system checks all array indexing to ensure indices are within the bounds of the array. You no longer have dangling pointers and trashing of memory because of incorrect pointers, because there are no pointers in Java.

9. What happens if the constructor is absent in Java and C++?
It will be made automatically by the built-up in.

10. Which two conditions make data type “abstract” ?
- The representation, or definition, of the type and the operations are contained in a single syntactic unit
- The representation of objects of the type is hidden from the program units that use the type, so only direct operations possible on those objects are those provided in the type’s definition

17. The namespace of the C# standard library, System, is not implicitly available to C# programs. Do you think this is a good idea? Defend your answer.
I think it is not, because it reduces its efficiency.

19. Compare Java’s packages with Ruby’s modules.
In Ruby, the require statement is used to import a package or a module. For example, the extensions package/module is imported as follows.

require 'extensions'
External files may be included in a Ruby application by using load or require. For example, to include the external file catalog.rb, add the following require statement.

require "catalog.rb"
The difference between load and require is that load includes the specified Ruby file every time the method is executed and require includes the Ruby file only once.

In Java, the import statement is used to load a package. For example, a Java package java.sql is loaded as follows.

import java.sql.*;

Concepts of Programming Languages - Chapter 10


Review Questions

1. What are the two reasons why implementing subprograms with stack-dynamic local variables is more difficult than implementing simple sub-programs?
A stack-dynamic local variable is more complex activation records. The compiler must generate code to cause implicit allocation and de-allocation of local variables.
Recursion must be supported (adds the possibility of multiple simultaneous activations of a subprogram).

2. What is the difference between an activation record and activation record instance?
The Format, or layout, of the non-code part of a subprogram is called an activation record.
An activation record stores all the information about subprogram calls, activation records stores the following data (in the following order).
Return address
Static link – to the static parent (where the subprogram is declared).
Dynamic link – to the caller of this subprogram.
Parameters
Local variables.

4. What are the two steps in locating a nonlocal variable in a static-scoped language with stack-dynamic local variables and nested subprograms?
Find the correct activation record instance.
Determine the correct offset within that activation record instance.

5. Define static chain, static depth, nesting_depth, and chain offset.
A static chain is a chain of static links that connects certain activation record instances.
Static_depth is an integer associated with a static scope representing the scope’s nesting depth.
The chain_offset or nesting_depth of a non-local reference is the difference between the static_depth of the reference and that of the scope where it is declared.

6. What are the two potential problems with the static chain methods?
A nonlocal reference is slow if the number of scopes between the reference and the declaration of the referenced variable is large.
Time-critical code is difficult, because the costs of nonlocal references are not equal, and can change with code upgrades and fixes.

7. What is display?
One alternative to static chain is to use a display, for this approach, the static links are collected in a single array called a display. Display uses a pointer array to store the activation records along the static chain.

10. Explain the two methods of implementing block?
Blocks are treated as parameter less subprograms that are always called from the same place in the program.
Block can also be implemented in a different and somewhat simpler and more efficient way. The maximum amount of storage required for block variables at any time during the exaction of program can be statically determined, because block are entered and exited in strictly textual order.

11. Describe the deep access method of implementing dynamic scoping?
Deep Access – nonlocal references are found by searching the activation record instances on the dynamic chain. Length of chain cannot be statically determined every activation record instance must have variable names.

12. Describe the shallow access method of implementing dynamic scoping?
In case of shallow access names and values are stored in a global table. Using this method, space is allocated for every variable name that is in the program (one space for variable temp though there might be several declarations of temp in the different methods). When a sub-routine is called it saves the current value of the variable and replaces it with the value in its current scope and restores the value of the variable while exiting.

14. Compare the efficiency of the deep access method to that of the shallow access method, in term of both call and nonlocal access?
The deep access methods provides fast subprogram linkage, but references to nonlocal, especially references to distant nonlocals (in term of the call chain), are costly. The shallow access methods provide much faster references to nonlocals, especially distant nonlocals, but are more costly in term of subprogram linkage.


Problem Set

7. It stated in this chapter that when nonlocal variables are accessed in a dynamic-scoped language using the dynamic chain, variable names must be stored in the activation records with the values. If this were actually done, every nonlocal access would require a sequence of costly string comparisons on names. Design an alternative to these string comparisons that would be faster.
One very simple alternative is to assign integer values to all variable names used in the program. Then the integer values could be used in the activation records, and the comparisons would be between integer values, which are much faster than string comparisons.

8. Pascal allows gotos with nonlocal targets. How could such statements be handled if static chains were used for nonlocal variable access?
Following the hint stated with the question, the target of every goto in a program could be represented as an address and a nesting_depth, where the nesting_depth is the difference between the nesting level of the procedure that contains the goto and that of the procedure containing the target. Then, when a goto is executed, the static chain is followed by the number of links indicated in the nesting_depth of the goto target. The stack top pointer is reset to the top of the activation record at the end of the chain.

9. The static-chain method could be expanded slightly by using two static links in each activation  record instance where the  second points to the static grandparent activation record instance. How would this approach affect the time required for subprogram linkage and nonlocal references?
Including two static links would reduce the access time to nonlocals that are defined in scopes two steps away to be equal to that for nonlocals that are one step away. Overall, because most nonlocal references are relatively close, this could significantly increase the execution efficiency of many programs.

11. If a compiler uses the static chain approach to implementing blocks, which of the entries in the activation records for subprograms are needed in the activation records for blocks?
There are two options for implementing blocks as parameterless subprograms: One way is to use the same activation record as a subprogram that has no parameters. This is the most simple way, because accesses to block variables will be exactly like accesses to local variables. Of course, the space for the static and dynamic links and the return address will be wasted. The alternative is to leave out the static and dynamic links and the return address, which saves space but makes accesses to block variables different from subprogram locals.

Saturday, June 8, 2013

Concepts of Programming Languages - Chapter 9


Review Questions

1. What are the three general characteristics of subprograms?
Each subprogram has a single entry point, excluding co-routine.
The calling program is suspended during the execution of the called subprogram, which implies that there is only one subprogram in execution at any given time.
Control always returns to the caller when the subprogram execution terminates.

4. What are formal parameters? What are actual parameters?
The parameters in the subprogram header are called formal parameters.
Subprogram call statements must include the name of the subprogram and alist of parameters to be bound to the formal parameters of the subprogram. These parameters are called actual parameters.

5. What are the advantages and disadvantages of keyword parameters?
The advantage of keyword parameter is that they can appear in any order in the actual parameter list.
The disadvantage to keyword parameters is that the user of the subprogram must know the names of formal parameters.

6. What are the design issues for subprograms?
What parameter-passing method or methods are used?
Are the types of the actual parameters checked against the types of the formal parameters?
Are local variable statically or dynamically allocated?
Can subprogram definitions appear in other subprogram definitions?
If subprograms can be passed as parameters and subprograms can be nested, what is the referencing environment of a passed subprogram?
Can a subprogram be overloaded?
Can subprograms be generic?

7. What are the advantages and disadvantages of dynamic local variables?
Advantages:
They provide flexibility to the subprogram
The storage of local variables in an active subprogram can be shared with the local variables in all inactive subprograms.
They efficiently used when computer has small memory (Faster Access).

Disadvantages:
Cost of the time required to allocate
Access to dynamic local variable must be indirect
The stack dynamic local variables, subprograms cannot be history sensitive

9. What are the modes, the conceptual modes of transfer, the advantages, and the disadvantages or pass-by-value, pass-by-result, pass-by-value-result, and pass-by-reference parameter-passing models?
There are two conceptual models of how data transfers take place in parameter transmission. Either an actual value is copied or an access path is transmitted.

The advantage of pass-by-value is its speed.
The disadvantages of pass-by-value are, when copies are used, additional storage is required.
Storage and copy operations can be costly.

Pass-by-result has all of the advantages and disadvantages of pass-by-value, but more disadvantages. An additional disadvantage is that there can be an actual parameter collision, because order of expressions matter.
Pass-by-value-result has the same advantages and disadvantages as pass-by-value and pass-by-result with some more advantages. The largest extra advantage of pass-by-value-result is that it solves pass-by-reference’s aliasing problems.

An advantage of pass-by-reference is that it is efficient in both time and space.
A disadvantage to pass-by-reference is the increase in time to access formal parameters because of the additional level of indirect addressing. Secondly, if only one way communication to the called subprogram is required, inadvertent and erroneous changes may be made to the actual parameter. Finally, aliasing should be expected with pass-by-reference. Since pass-by-reference makes access paths available to the called subprograms, it broadens their access to nonlocal variables. These aliasing problems lead to decreased readability and reliability.

10. In what ways can aliases occur with pass-by-reference parameters?
Aliases can be occurring because pass-by-reference makes access paths available to the called subprograms.

17. What is parametric polymorphism?
Parametric polymorphism is provided by a subprogram that takes a generic parameter that is used in a type expression that describes the types of the parameters of the subprogram. Both Ada and C++ provides a kind of compile-time parametric polymorphism.

18. What causes a C++ template function to be instantiated?
C++ template functions are instantiated implicitly either when the function is named in a call or when its address is taken with the & processor.

19. In what fundamental way do the generic parameters to a Java 5.0 generic method differ from those of C++ methods?
Java does not use objects exclusively, java have no enumeration or record type. Whereas C++ Classes can be defined to have no parent, that is not possible in Java. All Java Classes must be subclass of the root class.

20. If a Java 5.0 method returns a generic type, what type of object is actually returned?
In Java any type or class can be returned by methods. Because methods are not types, they cannot be returned.

22. What are the design issues for functions?
Two design issues are functions.
Are side effects allowed?
What types of values can be returned?

23. In what ways are coroutines different from conventional subprogram?
Conventional subprograms are subordinate to their callers. When a routine calls a subprogram, execution suspends at that point in the program and resumes after the subprogram has run to completion. As a result, conventional subprogram invocation is atomic, much like a built-in statement in the programming language.


Problem Set

4. Suppose you want to write a method that prints a heading on a new output page,  along with a page number that is 1 in the first activation and that increases by 1 with each subsequent activation. Can this be done without parameters and without reference to nonlocal variables in Java? Can it be done in C#?
This can be done in both Java and C#, using a static (or class) data member for the page number.

6. Compare and contrast PHP’s parameter passing with that of C#.
PHP’s parameter passing is similar to that of C#, except that either the actual parameter or the formal parameter can specify pass-by-reference. Pass-by reference is specified by preceding one or both of the parameters with an ampersand.

7. Consider the following program written in C syntax:
void fun (int first, int second){

 first += first;

 second += second;

}

void main() {

 int list [2] = {3,5};

 fun(list[0], list[1]);

}

For each of the following parameter-passing methods, what are the values of the list array after execution?
a. Passes by value
b. Passes by reference.
c. Passes by value-result
a. 3, 5
b. 6, 10
c. 6, 10

11. Compare the use of closures by programming languages.
Nearly all functional programming languages, most scripting languages, and at least one primarily imperative language, C#, support closures. These languages are static-scoped, allow nested subprograms, and allow subprograms to be passed as parameters.

15. How is the problem of passing multidimensional arrays handled by Ada?
Ada compilers are able to determine the defined size of the dimensions of all arrays that are used as parameters at the time subprograms are compiled.

Monday, April 8, 2013

Concepts of Programming Languages - Chapter 7


Review Questions

2. What is a ternary operator?
A ternary operator is an operator that has three operands.

3. What is a prefix operator?
A prefix operator is an operator that precedes the operands.

4. What operator usually has right associativity?
Exponentiation operator.

5. What is a nonassociative operator?
A nonassociative operator is an operator that needs to be parenthesized to show the desired order to become legal.

8. Define functional side effect.
Functional side effect is a side effect that occurs when the function changes either one of its parameters or a global variable.

11. What is an overloaded operator?
An overloaded operator is an arithmetic operator that is often used for more than one purpose.

24. What two languages include multiple assignments?
Ruby and Perl.

28. What is a cast?
Explicit type conversion.


Problem Set

1. When might you want the compiler to ignore type differences in an expression?
Suppose Type1 is a subrange of Integer. It may be useful for the difference between Type1 and Integer to be ignored by the compiler in an expression.

3. Do you think the elimination of overloaded operators in your favorite language would be beneficial? Why or why not?
Yes. Because eliminating overloaded operators will increase readability and prevent compiler confusion in choosing the correct meaning of the operator.

7. Describe a situation in which the add operator in a programming language would not be commutative.
An expression such as i + fun(j)

13. Let the function fun be defined as

int fun (int *k){
 *k += 4;
 return 3 * (*k) – 1;
}

Suppose fun is used in a program as follows:

void main(){
 int i = 10, j = 10, sum1, sum2;
 sum1= (i / 2) + fun(&i);
 sum2 = fun (&j) + (j / 2);
}

What are the values of sum1 and sum2
a. if the operands in the expressions are evaluated left to right?
b. if the operands in the expressions are evaluated right to left?

a. left to right: sum1 is 46; sum2 is 48
b. right to left: sum1 is 48; sum2 is 46

15. Explain why it is difficult to eliminate functional side effects in C.
All functions in C are subprograms and each of them return only one value.To return more that one value, we have to use parameters and if the parameters are pointers it may change the value of variables. Another problem is if the function changes the value of a global variable, it may affect the whole program.

20. Consider the following C program:

int fun (int *i){
 *i += 5;
 return 4;
}

void main(){
 int x = 3;
 x = x + fun( &x );
}

What is the values of x after the assignment statement in main, assuming
a. operands are evaluated left to right.
b. operands are evaluated right to left.

a. 7
b. 12


Sunday, April 7, 2013

Concepts of Programming Languages - Chapter 6


Review Questions

1. What is a descriptor?
A descriptor is the collection of the attributes of a variable.

3. What are the design issues for character sting types?
- Should strings be simply a special kind of character array or a primitive type?
- Should strings have static or dynamic length?

4. Describe the three string length options.
- Static length string, the length can be static and set when the string is created.
- Limited dynamic length strings, allow strings to have varying length up to a declared and fixed maximum set by the variable’s definition.
- Dynamic length strings, allow strings to have varying length with no maximum.

11.How does JavaScript support sparse arrays?
JavaScript sparse arrays means that the subscript values need not be contiguous.

12. What languages support negative subscripts?
Perl.

13. What languages support array slices with stepsizes?
Phyton, Perl, and Ruby.

23. What is the primary difference between a record and a tuple?
The elements of a record are named while the elements of a tuple are not named.

24. Are the tuples of Python mutable?
No.

27. What is the action of the Scheme function CAR?
The function CAR returns the first element of its list parameter.

28. What is the action of the F# function tl?
The function tl returns all elements of its list parameter except the first one.

32. What are the design issues for unions?
- Should type checking be required? Note that any such type checking must be dynamic.
- Should unions be embedded in records?

33. Are the unions of Ada always type checked?
Yes.

34. Are the unions of F# discriminated?
Yes.

43. What is a compatible type?
A compatible type is one that either is legal for the operator or is allowed under language rules to be implicitly converted by compiler-generated code to a legal type.


Problem Set

7. Compare the pointer and reference type variable in C++.
A C++ reference type variable is a constant pointer that’s always implicitly dereferenced.

9. C provides two derived data types both for name and structure type equivalence: struct and union. Makes a study on when to use struct type variables and union type variables.
If all data members of the variables are to be used at once then struct type variables are required, otherwise union type variables should be used.

21. In what way is dynamic type checking better than static type checking?
Dynamic type checking detects error at compile time and it is better than detecting error at run time.

Concepts of Programming Languages - Chapter 5


Review Questions

2. What is the potential danger of case-sensitive names?
It affects the writability of a program because the need to remember specific case usage makes it more difficult to write correct programs.

3. In what way are reserved words better that keywords?
Reserved words are better that keywords because the ability to redefine keywords are confusing.

4. What is an alias?
Alias is a variable name that can be used to access the same memory loaction of another variable name.

6. What is the l-value of a variable? What is the r-value?
R-value is the address of a variable.
L-value is the variable's value.

7. Define binding and  binding time.
Binding is an association between an attribute and an entity.
Binding time is the time at which a binding takes place.

8. After language design and implementation [what are the four times binding can take place in a program?]
Type bindings, static type bindings, dynamic type bindings, storage bindings.

18. What is a block?
A block is a section of code which variables storage is allocated when the section is entered and deallocated when the section is exited.

23. What are the advantages of named constants?
To improve readability, to parameterize a program.


Problem Set

1. Decide which of the following identifier names is valid in C language. Support your decision.
_Student
Student
student123
In C language, underscore (_) and uppercase/lowercase letter are allowed to start identifier names, digits and symbols aren't allowed. "int" is a reserved word for integer so it's not allowed.


2. What is l-value? Write a statement in C language which gives the compile time error “l-value required”.
The address of a variable is called its l-value.
Example:
int i = 10, j;
j = 9--; //error C2105: '--' needs l-value


4. Why is the type declaration of a variable necessary? What is the value range of the int type variable in Java?
Because the type declaration of a variable determines the range of values the variable can store and the set of operations that are defined for values of the type.
-2147483648 to 2147483647.

5. Describe a situation each where static and dynamic type binding is required.
Static binding is required if we need the bindings to occur first before the run time begins and remains unchanged throughout program execution.
Dynamic binding is required if we need the binding to occur first during run time or can change in the course of program execution.